How to dry a wet mattress?

Something happens accidentally, like spills from beverages, water or drinks, roof leaking due to rain or cracks, rains, flooding, humidity, children or pets misshapen like urine or anything, and your mattress getting wet. First of all, do not panic. Though it’s pretty challenging, you can dry out your mattress effectively and prevent it from foul odour or mustiness by using the right approach on time.

In this article, we will try to guide you entirely by explaining all the steps and tips on how to dry a wet mattress or water-damaged mattress after bedwetting, rained on, from the rain-soaked mattress, how a wet mattress with a hair dryer, if spilt water on the mattress, damp mattress, how to dry a mattress after cleaning etc. You will find answers or solutions for all these questions below in detail and how to prevent the mattress from odour, growth of moulds or stains.

How to dry a wet mattress- Effective steps and tips:

Assessing the Damage:

The first step is to figure out or assess how bad the damage is. This would help you understand the situation’s severity and then decide how to fix it. 

  • So, look at the wet surface closely and observe whether it gets wet from water, tea, urine, or washing. Is it having a stain, deeper or just on the cover? Check for odours, whether the area is wet, consider the material of the mattress or sheet, and feel the time.
  • Liquids like water drinks are easy to tackle or to get dry if you take timely action. But coffee, tea, and urine need extra quick effort to avoid stains.
  • It’s essential not to panic because one of the crucial facts is that some of the damages due to flooding, sewage or unforeseen events cannot be repaired. Because water penetrates deeper with some harmful liquids, it leads to the risk of mould and mildew or is hard to fix.

Act Promptly:

After determining the damage, your swift action can save your wet mattress from stains, mould growth, and foul odours or get dry as soon as possible. 

  • The longer the moisture remains in the mattress, if you leave it to fix after some time, it will go deeper, and the formation of odour, stains and moulds will be active. 
  • Then, support the mattress against the wall or stand it anywhere in a well-ventilated space or under the fan to get air circulation.
  •  Additionally, remove the moisture with the help of a towel or an absorbent fabric to blot off the water. 
  • The use of baking soda is helpful to avoid the foul odour. You can use a hair dryer or a vacuum immediately if it’s just water to speed up the drying process. 
  • To get optimal results, prompt action is the first key to preventing your wet mattress.

Remove the Excessive Moisture:

As soon as the mattress gets wet with water or any liquid, your prompt action will be to absorb the moisture as much as possible. 

  • You can blot the mattress using absorbent materials like paper towels, hand towels, and a clean fabric. 
  • First, you need to press down the mattress to blot excessive moisture, and then you can change the absorbent material, whatever you are using, like a hand towel. Once it gets soaked, try removing as much liquid as possible. You can stop when your towel gets dry. 
  • Additionally, you can use a vacuum or a hairdryer directly to absorb the excessive moisture. It will help to blot maximum humidity. 
  • Other measures you can take are rotating the mattress so that excessive water gets out and putting it in the sunlight or under the fan.
  • If it’s just water, these methods will be enough to prevent the wet mattress from getting dry in a day.

Remove Bedding:

Another step after taking swift action to prevent the mattress from getting stained, odour, or mould by assessing the damage is to pull off all the bedding, including bed sheets, pillows and blankets. 

  • The goal is to expose the wet area, prevent the mattress, and take timely measures to blot excessive moisture from the bed and allow for adequate airflow.

Improve the Air circulation and Ventilation:

After stripping off bedding and blotting the maximum amount of excessive moisture, you need to open all the windows in the room and turn on the fan for the ventilation process.

  • Prop the mattress up against the wall of your room for air circulation; it will also help to stop mould growth.
  • Put the mattress in a place with proper Ventilation to increase the airflow.
  • You can put your mattress out in the sun on your roof to accelerate the dry process.
  • You can place your mattress under the fan after absorbing excessive water to move the air around the mattress and also to get direct air from the fan.
  • Additionally, you can use a humidifier in your room to reduce the humidity.
  • All these actions will help to dry out your mattress as fast as possible without the growth of moulds, foul odours or stains.

Elevate the mattress and Dry out:

  • One of the essential steps to dry out your wet mattress is to prop the mattress up against any wall of your room or anywhere where there is proper Ventilation. 
  • This method would increase air circulation in and out of the mattress and accelerate drying.

Moreover, this step will facilitate the evaporation process, too.

Use Fans and Dehumidifiers to accelerate the drying process:

The most crucial thing in drying out the mattress is the airflow; if there’s no sunlight exposure, you can use fans to dry a wet mattress.

  • For that, you need to position your mattress in a well-ventilated place.
  • To create good airflow, you can place more than one fan near your mattress to get good air circulation.
  • Passing air directly on the mattress speeds up the drying process. For that, you need to turn the fans on at high speeds. 
  • After every few hours, rotate the mattress so that both sides get equal airflow.
  • Dehumidifiers are essential to absorb the excessive environmental moisture to speed up the drying process. Set the dehumidifier to a high setting to work effectively.

Sunlight Exposure:

Sunlight exposure is the natural method to dry your wet mattress and is the most effective method. It also helps to prevent mould and bacterial growth.

  • For sunlight exposure, you must select a suitable place where your mattress can get sunlight most of the day.
  • You can lay the mattress on a clean surface or prop it up according to your needs.
  • Remember to rotate the mattress periodically so that both sides of the mattress get equal amounts of sunlight exposure.
  • Avoid excessive sun exposure, and once you take the mattress in place, make sure proper Ventilation.

Fresh Air:

Fresh air is again a natural method like sunlight exposure and is one of the best. If spilt water on a mattress or a water-damaged mattress, you can put your mattress in the fresh air on a properly clean surface and place it after removing or absorbing all the excessive water or moisture from the mattress. Remember to rotate the mattress for proper air circulation.

Use Hairdryers and Vacuum:

  • If the affected area is small like a few water drops in small spots, you can use a hairdryer in a warm setting; that is a quick solution to dry the wet area.
  • Vacuums are not used to dry but to absorb excessive moisture. That’s how it is a part of the drying process. 
  • For a mattress that got rained on, you can use this method. First, ensure that you have already blotted the wet area with a towel, then gently run the nozzle of the damp/dry vacuum over the affected area to remove the excessive moisture.
  • After this, put the mattress in place with good Ventilation or air circulation to dry it thoroughly.

Addressing Stains:

Mattresses get wet from urine, coffee, or tea; they might get stains, damaging your bed. So, a cautious approach is required to deal with the colours.

  • Foremost thing is to identify the type of the stain. Since different colours require different treatments. The second significant action is to blot excessive moisture from the affected area.
  • Use mild cleaning solutions like mostly vinegar or mild liquid detergent with water.
  • Dampen a clean cloth with the cleaning solution and apply gently. Then, dampen another clean cloth in plain water and gently blot the treated area.
  • Put the mattress in a ventilated place to get dry. If feasible, then place it under the sunlight for proper air circulation.
  • For stains like those you get from tea, you can sprinkle salt evenly on the surface after rubbing it on the mattress surface and blot the area. This method is best to avoid tea stains.

Use of Baking soda for odour control:

Use baking soda after bedwetting to eliminate unwanted odours.

  • It would help if you sprinkled baking soda evenly on the affected mattress area, blotting all the excessive moisture using a towel. 
  • You can rub the baking soda on the surface of the wet bed.
  • Let it sit, and then vacuum up the baking soda. This will remove excessive moisture and odour from the mattress.
  • After vacuuming, let the mattress air out in a well-ventilated area.

Get help from Professional Cleaning Services:

If you are facing a severe moisture issue, which is unavoidable and you cannot deal with, then it’s better to consider professional cleaning of your mattress.

  • Professional cleaners have experts who have experience handling wet mattresses effectively.
  • Professionals have specialized equipment liquids to deal with odours, stains, growth of moulds and mildews. 
  • Most of all, it will only give you peace of mind if you choose the right professionals.
  • If your mattress is still under warranty, then contact your manufacturers first.

Future Escapes:

  • Once you are done drying your mattress correctly, you can protect it from further getting dry by covering it with a mattress cover or protector. Many types of protection sheets available in the market are waterproof, preventing the mattress from absorbing sweat, oil, germs, urine, dirt and spilt water. They also provide mental relief since you do not need to worry about minor incidents like spilling water on the mattress. 
  • Another thing you can do is to keep your bed in the air or under the sunlight within a week to get air flow thoroughly and have less chance of getting order or moisture.
  • Ventilation of your room where you place your mattress is essential to maintain it.

Why Avoid Heat Sources to dry a wet mattress?

  • If you use direct heat exposure to dry out your wet mattress, it will also damage the structure of your bed and the material.
  • Using heat sources like heaters, hair dryers, or radiators to dry a damp mattress can cause the mattress material to shrink, wrap or weaken.
  • It can lead to uneven drying of your mattress.
  • If the materials are flammable, then it can result in a fire hazard.

Bottom Line:

The effectiveness of the methods mentioned above depends on factors like weather conditions, mattress material and humidity level. You can choose the one that suits you after determining the damage. But all these methods are tried and tested, and I am sure that if you follow them, you will get the results and can prevent your wet mattress.

However, it would be challenging to overcome some incidents, be patient, assess the damage properly, and act quickly. You can cover or save the injury from further damage by following these steps. With your prompt action, you can reduce the chances of mould growth and odour and restore the water-damaged mattress. But still, if it’s beyond your efforts, contacting a professional is better.

Leave a Comment