Can You Stack Memory Foam Mattresses?


Are you looking to maximize your comfort level while also saving space? If so, can you stack memory foam mattresses? Those who have found the contouring support and pressure relief of memory foam but are limited in their living space often wonder about this. 


This article will discuss whether or not you may safely stack memory foam mattresses and offer advice on how to do so. Read on if you’re interested in creating a cozy, multi-level haven for restful sleep.


Can you stack memory foam mattresses?


Since their introduction, memory foam mattresses have skyrocketed in popularity due to their ability to alleviate pressure spots and provide unparalleled comfort and support. However, a common question arises for those who must maximize their limited space: can memory foam mattresses be stacked?


Yes, memory foam mattresses can be stacked. Stacking memory foam mattresses creates a thick, multi-layered sleeping surface that can better support the body and alleviate pressure points than a single mattress. However, a few things to remember before you stack your memory foam mattresses.


Consult the manufacturer.


Before stacking memory foam mattresses, it’s crucial to double-check the manufacturer’s instructions. Confident mattress makers don’t advise stacking their products for safety or durability.


The instructions or warranty information that comes with the mattress should provide the manufacturer’s recommendations. Make sure stacking is permitted by thoroughly reviewing the relevant paperwork. If the mattress’s maker doesn’t advise stacking, you shouldn’t do it. You risk damaging the mattress or having your warranty voided.


Manufacturers know their products best and have ensured their safety and durability, so it’s best to take their advice. If they say not to stack the mattresses, it’s best to listen to them and find another technique to make a cozy bed.


Consider the height of your bed frame.


It’s crucial to consider the height of your bed frame when contemplating stacking memory foam mattresses. This is because if you stack a lot of mattresses on top of each other, you may end up with a very high bed, which can be unpleasant and even dangerous if you need help staying in bed.


To prevent this, you should consider the thickness of each mattress and the height of your bed frame before stacking. If you want to avoid having a bed that is too high, you should only stack up to two mattresses on top of each other.


You may need to go elsewhere to find the amount of comfort you’re after if your bed frame is on the tall side. One option is a thicker, more supportive mattress, while another is a mattress topper on top of your current mattress.


Keep your bed frame’s height in mind while deciding whether or not to stack memory foam mattresses. You can make your bedroom just right by ensuring your safety and comfort.


Choose the proper mattresses.


Choosing the correct memory foam mattresses to stack is essential for making a cozy and supportive bed. The firmness and density of the mattresses you select should be comparably high.


This will ensure that the mattresses are comfortable and supportive throughout their entirety. You may wind up with an uncomfortable and unsatisfying night’s sleep if you stack mattresses of dramatically different hardness levels or densities.


The thickness of each mattress is an additional factor to think about. Selecting thinner mattresses over thicker ones may be more practical if you intend to stack several of them. Too much height while sleeping can be uncomfortable and even dangerous, and thick mattresses are often to blame.


Finally, think about getting some stackable memory foam mattresses. Mattresses made to be stacked available from some manufacturers, simplifying and possibly even safeguarding the process. Mattresses with a non-slip surface are likelier to stay where they are placed and less likely to slide around.


Use a mattress topper or pad.


When stacking memory foam mattresses, a mattress topper or pad can create a smooth transition between each layer and minimize uncomfortable gaps. Protecting the top of the foundation mattress with a topper or pad can also increase its durability and use over time.


The purpose of a mattress topper or pad is to provide an additional layer of comfort over an already comfortable mattress. They come in various densities and materials, including memory foam, latex, down, and cotton. If you want to stack memory foam mattresses and use a topper or pad, be sure it is the exact size of your mattress and fits snuggly over each layer.


Any discomfort from sleeping on two (or more) mattresses can be reduced by using a topper or pad between them. When stacked, two firm memory foam mattresses can provide an uncomfortable sleeping surface. Putting a soft pillow or topper on the mattresses is an easy way to increase comfort.


Additionally, a mattress pad or topper can lessen the likelihood that movement and rubbing will cause the top layer of the base mattress to wear and tear. It can also protect both mattresses from dirt and liquids, extending their useful lives.


Secure the mattresses.


Memory foam mattresses should be fastened securely together when stacked to avoid movement. 


The mattresses can be fastened together in several different ways. Use a bungee rope or mattress strap to keep the four mattress corners together. This simple and practical solution can help keep the mattresses in place while allowing some movement and flexibility.


A non-slip rug pad can also be used in between the layers of a mattress. These pads are made to keep carpets from moving around but can also hold mattresses in place. You can use a non-slip rug pad by placing it in between each piled mattress. In addition to adding another layer of comfort and support, this can assist in keeping the mattresses from shifting apart.


Some memory foam mattresses have built-in capabilities to keep them from shifting around when piled. Some mattresses, for instance, are designed with a non-slip bottom to keep you from sliding around. Some may already have straps or connectors, making them ideal for safe and convenient stacking.


Drawbacks of stacking memory foam mattresses


It damages mattresses.


Putting two mattresses on each other is like building a top-heavy, unstable structure that could damage both mattresses. Adding another mattress on top of an existing one can cause the bottom mattress to bear more weight than originally designed. Because of the extra weight and pressure, the bottom mattress may gradually lose its original shape and support over time.


But that extra weight and pressure will also affect the top mattress. Indentions, depressions, and dips are more likely to appear on a top mattress made of memory foam since this material progressively molds to the body’s shape and does not recover its previous shape. This can lead to an uncomfortable and unsatisfactory night’s sleep due to an uneven bed.


The extra weight of the piled mattresses might cause the slats of a slatted bed to sag and separate. This can lead to increased sagging of the bottom mattress and potential bulging of the top mattress at the spots where the gaps are. Additional slats may not prevent the margins of the bed frame from sagging, reducing their capacity to support the mattresses.


A solid base is needed for your mattress.


A good base is essential to the life and effectiveness of a mattress. With a consistent and firm underpinning, a mattress would eventually sag and retain its form. When you stack mattresses on top of each other, the foundation becomes unsteady, and the mattresses can sag or develop lumps and depressions.


This instability also raises the possibility of the mattresses sliding or shifting around while in use, which can be both hazardous and unpleasant.


While a mattress on the floor provides a level surface, it also increases the risk of mold, mildew, and dust mites due to a lack of ventilation. Additionally, some people may find it difficult to sleep on the floor due to a lack of support for their spine and joints.


For this reason, it’s crucial to place your mattress on a stable surface, like a slatted bed frame. 


Mattresses slide.


There is a potential for movement and instability when stacking mattresses. The lack of a stable base for the mattresses to rest on is one possible reason for this problem. Mattresses can shift because their edges dip millimeters before the rod edge is stitched, leaving spaces that invite sliding.


All that shifting and sliding around can put undue stress on the mattresses, warping and possibly breaking the internal coil springs. Because of this, someone could be hurt if the top mattress fell off the base. Many mattress covers are made from shiny, silky materials that can increase the slippage between the layers, exacerbating the problem.


It can worsen back pain.


As was said before, contemporary mattresses are built to ensure proper spinal alignment and body support as one sleeps. They are created with various materials like foam, latex, and innerspring coils to offer optimal comfort and support. Mattress companies spend much R&D to guarantee their wares are as comfortable and durable as possible.


The alignment and support that individual mattresses were made to provide can be compromised when stacked on top of one another. Muscle soreness and tension are only two issues that might arise from this. The bottom mattress can compress unevenly under the weight of the top bed, resulting in low spots and sagging. Pain and discomfort may occur from poor posture and spinal misalignment.


As mattresses compress and expand during usage, the instability can exacerbate existing support and posture alignment issues. Uneven weight distribution can worsen if the beds shift and separate into their layers.


Mattresses get hotter.


Air circulation is impeded in both mattresses when stacked on top. Because of the resulting buildup of moisture and heat, this can make sleeping unpleasant.


 Stacking multiple memory foam mattresses exacerbates the issue of excessive heat on the bed. Overheating can occur at night when body heat is trapped between the mattresses, and the mattress’s surface area is decreased. 


Warranty issue


Stacking mattresses also cause problems with the warranty. If one of your stacked mattresses has a defect, the original manufacturer may refuse to replace it.


Stacking mattresses is also not recommended because some guarantees require a specific type of bed frame or foundation to be used with the mattress. Before using a mattress in a way the manufacturer doesn’t recommend, it’s wise to familiarize oneself with the terms of the warranty.


Trigger allergies


Hypoallergenic mattress covers are designed to prevent the growth of dust mites and other allergens. The allergens can’t get into the mattress because these coverings are constructed of densely woven textiles. In addition, antimicrobial treatments are commonly applied to the covers to prevent the proliferation of mold germs and other potentially hazardous organisms.


However, the hypoallergenic cover on the bottom mattress becomes trapped when mattresses are stacked. Heat and moisture can build up between the beds, leading to mold growth that can aggravate allergies and other respiratory issues. Mold might also shorten the mattress’s lifespan.




Can you double-stack mattresses?


It is possible to double-stack mattresses, but it is not advised. Additionally, the warranty may be nullified, and the mattresses may be damaged if double-stacked.


In addition, if you double up, you may end up with a bed that’s too high to get in and out of easily. When trying to stack beds, it’s crucial to consider the bed frame’s height and the mattress’s depth.


Using a mattress topper or purchasing a high-quality memory foam mattress with a thicker profile are better alternatives to improve the bed’s comfort and support. This way, you won’t have to worry about voiding the warranty or compromising safety while enjoying the necessary support and comfort.


How many mattresses can you stack?


The manufacturer’s recommendations, the height of your bed frame, and the thickness of each mattress all play a role in determining how many mattresses you can stack. Because of the instability that can result, using more than two mattresses stacked on each other is not suggested.


The uneven sleeping surface that results from stacking multiple mattresses is another common source of discomfort and back pain. Too many mattresses stacked together can harm the mattresses and violate the guarantee. Before piling on the mattresses, you need to figure out how high you can stack them and how thick the bed frames are.


Consider a mattress topper or a high-quality memory foam mattress with a higher profile if you want a more comfortable and supportive sleeping surface.


Can you stack two mattress toppers?


Two mattress toppers stacked on each other might not be the comfiest or most supportive sleeping surface, but it’s certainly doable. While mattress toppers are a great way to add comfort and support to your bed, stacking more than two at a time can make for an uncomfortable sleeping experience and an unlevel surface.


The height of your bed will increase if you stack two mattress pads on top of each other, which may only be comfortable for some. Before attempting to stack mattress toppers, it is essential to consider the height of your bed frame and the thickness of each topper.


Rather than stacking pillows or mattresses to provide the desired support and comfort, consider purchasing a high-quality mattress topper.




Stacking mattresses on top of each other is not a good idea. If you do this, you risk hurting your back, damaging the beds, nullifying the guarantee, getting too hot, and setting off your allergies. In addition, the mattress may become unstable due to the added weight, and the bed frame may sag between the slats. Moreover, airflow between the layers is crucial for preserving the structure and mitigating allergens like dust mites. The cumulative effect of these issues is a decrease in mattress comfort and a faster depreciation rate. 


Leave a Comment